Clients In The News
- Jan
- 25
Posted on January 25, 2012 by Joel Williams
The potential efficiencies of water boosting systems from Grundfos are highlighted in the January cover story of Plumbing Mechanical Engineer, which profiles one apartment building’s jaw-dropping energy savings achieved through variable speed pump technology.
In fact, talk about putting your money where your mouth is- this project’s contractor was so confident in the potential energy savings that he paid for the new system himself — all in an effort to convince building management to invest in the efficient technology.
The gamble paid off in spades.
An independent project audit vindicated the daring claim by documenting a 90 percent energy savings over a one-week period in September 2010, and a 26-month payback period.
Moreover, the drop in power consumption translates to an annual utility cost reduction of nearly $18,160. Total project savings are estimated at $275,000 over the average 15-year pump lifespan. Despite removing 70 HP from this system, the computerized control, demand-based performance of the new pumping station averages just 30 percent capacity.
- Jan
- 20
Posted on January 20, 2012 by Nora DePalma
Bath & Kitchen Pro covered the recent appointment of Jay D. Gould as President and Chief Executive Officer of American Standard Brands. Before joining American Standard, Gould was President of the Home & Family Group of Newell Rubbermaid. Taking an innovative, consumer-driven approach to building demand, he significantly increased revenues for the company’s Levolor, Calphalon, Rubbermaid and Graco brands throughout the economic downturn.
“We are excited to have Jay take the helm of American Standard,” said Tom Taylor, Chairman of the Board of Directors. “He brings tremendous experience in enhancing companies’ leading market positions and creating value by leading with a focus on growth, innovation and brand development.”
The complete press release on Gould’s appointment can also be viewed in the American Standard online pressroom.
- Jan
- 3
Posted on January 3, 2012 by Joel Williams
Editors at BUILDERnews Magazine awarded the Uponor Radiant Ready 30E its top prize in the Mechanical category in the publication’s annual “Best Products” competition. The Radiant Ready 30E™ is a complete radiant mechanical room designed in a compact, preassembled, easy-to-install panel. The unit includes a boiler, manifold, pump,expansion tank, pressure-relief valve, isolation valves, thermostat and air vent.
- Dec
- 28
Posted on December 28, 2011 by Joel Williams
Editors at This Old House Magazine selected two Uponor products for their “Best New Building Products Tools for Pros” 2011 annual compilation. Of the 14 “professional grade” tools highlighted, editors were impressed with Uponor’s Self-Contained Radiant-Heat System or Radiant Ready 30E Radiant mechanical room in-a-box launched earlier this year. TOH editors also gave high marks to a new cordless PEX expander tool from Milwaukee Tools, rating it a “must have.” The compact tool offers an extremely fast, precise way to make watertight connections in Uponor ProPEX tubing. Plus, it’s really cool to see in action. Kudos to Uponor engineering.
- Dec
- 5
Posted on December 5, 2011 by Joel Williams
A growing number of owners and managers of commercial and institutional properties have embraced steamtherapy for its health and wellness benefits. Learn more about the guidelines for proper equipment selection in this byline article from Mr. Steam that is featured in this month’s Construction Canada magazine.
Bart Gorelik, regional sales director for Mr. Steam, explains that commercial steam rooms are a relatively straightforward affair, “but only if one avoids two major pitfalls — improper generator sizing before the room is constructed and improper maintenance once it is finished.”
- Nov
- 21
Posted on November 21, 2011 by Joel Williams
In honor of World Toilet Day (11/19), National Public Radio’s Science Friday explored the surprising lack of access to sanitation faced by nearly 2.6 billion people — nearly one-third of the world’s population — as well as how engineers are making toilets more water efficient. Panelists included Jim McHale, vice president of engineering at American Standard, as well as several experts on global sanitation issues and civil engineering. Listen to the complete program here or watch a video.
- Nov
- 9
Posted on November 9, 2011 by Joel Williams
Unlike commercial fire sprinkler systems, which were created primarily to protect property, residential sprinkler systems are designed for life safety and are intended to control the fire, allowing occupants to escape safely.
Therefore, residential sprinkler systems have significantly different, and often less complex, design and installation requirements than commercial systems.
Uponor’s Jayson Drake discusses the design and installation options for residential sprinkler systems as part of this month’s Plumbing Systems & Design magazine. Read more here.
- Nov
- 2
Posted on November 2, 2011 by Nora DePalma
The adage, “you’re only as good as your tools,” is more pronounced in high-volume industries such as manufacturing and construction, where worker output directly drives profitability. For professional drywall contractors, an often overlooked means of greater productivity-and profits-is tools.
Read more about our Ames client: AWCI’s Construction Dimensions | Finishers Boost Productivity by 15 Percent with Better Tools.
- Oct
- 23
Posted on October 23, 2011 by Joel Williams
The Las Vegas Journal Review featured an article exploring how homeowners are increasing their home’s value with an affordable steam shower from Mr. Steam. Read more here.
- Oct
- 21
Posted on October 21, 2011 by Joel Williams
The Grundfos Vortex Flowsensors (VFS) are combined flow- and temperature transmitters ideal for residential and commercial solar thermal systems. Part of the company’s family of Direct Sensors, the sensors integrate micro-electro-mechanical (MEMS) sensing technology with an innovative corrosion-resistant coating that enables direct media contact for faster temperature and flow response, even with aggressive media. In addition to temperature control, the sensors also monitor flow rate accuracy to within 1.5 percent of full-scale flow.
The new two-in-one VFS sensors are ideal for monitoring solar thermal loop systems. Stand-alone temperature and flow sensors result in slow and inaccurate temperature regulation. With a stand-alone temperature sensor, intelligent boiler technology is able to compensate for changes in inlet temperature and efficiencies in the heat exchanger, but there is no link to the consumption/flow of water. Conversely, with a stand-alone flow sensor, a system can easily regulate the volume of water, but cannot respond quickly enough to changing temperature demands.
By combining the two; the best of both worlds will occur: A fast and accurate regulation of temperature. Learn more here.
